AQUA DRY GLAZE Base

824-1729 Promatch® Aqua Dry Glaze Neutral WB Stain

Product Codes:

824-1729 Neutral

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to staining.

General Information:

N/A

PDF Name: US-PIS_824-1729_Promatch_Aqua_Dry_Glaze_Neutral_WB_Stain

Tack Free Time: N/A

Files: US-PIS_824-1729_Promatch_Aqua_Dry_Glaze_Neutral_WB_Stain.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

Promatch Aqua Dry Glaze is an intermix system designed to create specialty finishes. The intermix system is available in 4 rich colors and a neutral base. The neutral base can be used to reduce strength.

spec_uses:

Excess glaze can be removed with an abrasive pad or dry rag wiping in one direction for specific desired look. Aqua Dry Glaze is to be used in Waterborne system only, the use in combination with acid cured system is not recommended.

VOC less exempt: <0.51

VOC lb/gal: <0.1

VOC less exempt g/l: <61

VOC g/l: <12

VOC lb/lb Solid: <0.03

VHAPs lb/lb Solid: <0.02

Note:

N/A

Suggested Uses:

As a monocolor system

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: Water

Retarder: N/A

Clean-up Solvent: Water

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: >160° F

Density (lb/gal): 10 - 12

Solid (% by weight): 18 - 50

Solid (% by volume): 10 - 30

Shelf Life (months): 12

AQUA DRY GLAZE Base

824-1729 Promatch® Aqua Dry Glaze Neutral WB Stain

Find distributor Trouver un distributeur

spec_description:

BACK

AQUA DRY GLAZE Base

824-1729 Promatch® Aqua Dry Glaze Neutral WB Stain

spec_description:

Product codeCodes de produit
Product Codes:

824-1729 Neutral

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: >160° F

Density (lb/gal): 10 - 12

Solid (% by weight): 18 - 50

Solid (% by volume): 10 - 30

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_824-1729_Promatch_Aqua_Dry_Glaze_Neutral_WB_Stain.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap