VINYL Primer

546-74XX ProVinyl® Vinyl Primer

Product Codes:

546-7400 White
546-7401 Neutral

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to coating. ProVinyl Vinyl Primer should be sanded with 280/320 grit stearated paper prior to being coated and the next coat must be applied within eight hours of sanding. ProVinyl Vinyl Primer cannot be used on metal, old oil or cellulose lacquers.

General Information:

Agitate material before use. Always mix ProVinyl Vinyl Primer while adding reducers in the recommended levels. ProVinyl Vinyl Primer must be agitated thoroughly at all times to ensure product consistency.Apply at 3 – 5 mils wet sanded substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper.

Provinyl Vinyl Primer uncatalyzed can be topcoated with only pre-catalyzed topcoats. Provinyl Vinyl primer catalyzed can be topcoated with Pre-Catalyzed or Conversion Varnish topcoats.

Maximum film build of ProVinyl Vinyl Primer should not exceed 2 mils dry. Contact with metal surfaces should be avoided. ProVinyl Vinyl Primer must not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats. ProVinyl Vinyl Primer must not be used and dried at temperatures below 64°F or relative humidity above 65%. During the curing process, the coating must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finish surfaces. This may accelerate discoloration.

PDF Name: US-PIS_546-74XX_ProVinyl_Vinyl_Primer

Tack Free Time: 10 - 15 minutes

Files: US-PIS_546-74XX_ProVinyl_Vinyl_Primer.pdf

Dry to Sand : 45 - 60 minutes

Dry to Stack: 3 hours

Tack Free Time: Flash off before entering oven

Dry to Sand: 20 - 30 minutes

Dry to Stack: 60 - 90 minutes

Note: N/A

spec_description:

ProVinyl Vinyl Primer is a primer that is used where excellent moisture resistance and adhesion is important. This product provides excellent build and hiding as well as very good moisture barrier.

spec_uses:

This product is recommended for priming kitchen cabinets, vanities as well as many other interior wood applications where adhesion or moisture may be a concern.

VOC less exempt lb/gal: <5.6

VOC lb/gal: <5.6

VOC less exempt g/l: <675

VOC g/l: <675

VOC lb/lb Solid: <1.6

VHAPs lb/lb Solid: <0.5

Note:

N/A

Suggested Uses:

Wood Primer

Mixing Ratio:

100 parts 546-7400 or 546-7401 to 3 parts 873-1229
This product can be used without catalyst. Catalyst can be added for improved performance properties.

Pot Life: 8 hours

Application Viscosity:

Zahn #2 signature cup 18 -22 seconds at 77°F

Reducer: 800-5301 or 800-5531

Retarder: 800-5328

Clean-up Solvent: 800-5500 or 800-1298

Recommended Wet Film: 3 - 5 mils

Coverage:

307 ft/gal at 1 mil dry and at 100% transfer efficiency. Coverage will vary depending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #2 signature cup 27 - 29 seconds at 77°F

Flash Point: 21.2°F (-6°C)

Density (lb/gal): 9.02 - 9.22

Solid (% by weight): 39% - 40%

Solid (% by volume): 19% - 22%

Shelf Life (months): 12

VINYL Primer

546-74XX ProVinyl® Vinyl Primer

Find distributor

spec_description:

ProVinyl Vinyl Primer is a primer that is used where excellent moisture resistance and adhesion is important. This product provides excellent build and hiding as well as very good moisture barrier.

Back

VINYL Primer

546-74XX ProVinyl® Vinyl Primer

spec_description:

ProVinyl Vinyl Primer is a primer that is used where excellent moisture resistance and adhesion is important. This product provides excellent build and hiding as well as very good moisture barrier.

Product code
Product Codes:

546-7400 White
546-7401 Neutral

Product information

Product specifications

Viscosity:

Zahn #2 signature cup 27 - 29 seconds at 77°F

Flash Point: 21.2°F (-6°C)

Density (lb/gal): 9.02 - 9.22

Solid (% by weight): 39% - 40%

Solid (% by volume): 19% - 22%

Shelf Life (months): 12

Uses

Environmental data (as supplied)

Application data

Surface Preparation

General Information

Drying Times

Find distributor

Download product information sheets

Files: US-PIS_546-74XX_ProVinyl_Vinyl_Primer.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap