PROMATCH® Aqua Wiping Stain Base

824-8019 Promatch® Aqua Wiping Stain Base Low VOC

Product Codes:

824-8019

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to staining.

General Information:

Maximum tint load, 15% maximum

Allow 824-8019 based stains to dry 2-3 hours at room temperature prior to sealing for best adhesion.

PDF Name: US-PIS_824-8019_Promatch_Aqua_Wiping_Stain_Base_Low_VOC

Tack Free Time: N/A

Files: US-PIS_824-8019_Promatch_Aqua_Wiping_Stain_Base_Low_VOC.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

Promatch Aqua Wiping Stain Base Low VOC is a stain base that can be tinted to any color using 896, 888, or 877 colorants, and Promatch Aqua Dyes. Promatch Aqua Wiping Stain Base provides maximum workability with no overlap up to 30 minutes during application. Outstanding clarity highlights the natural wood grain.

spec_uses:

Apply generously and wipe off to surface dry. Drying time 2 - 3 hours

VOC less exempt: < 6.3

VOC lb/gal: < 2.0

VOC less exempt g/l: < 756

VOC g/l: < 240

VOC lb/lb Solid: < 3.2

VHAPs lb/lb Solid: < 0.00

Note:

N/A

Suggested Uses:

As a clear base to develop wipe stain color

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: Water

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: >200° F

Density (lb/gal): 8.32

Solid (% by weight): 7.5%

Solid (% by volume): 6%

Shelf Life (months): 12

PROMATCH® Aqua Wiping Stain Base

824-8019 Promatch® Aqua Wiping Stain Base Low VOC

Find distributor Trouver un distributeur

spec_description:

BACK

PROMATCH® Aqua Wiping Stain Base

824-8019 Promatch® Aqua Wiping Stain Base Low VOC

spec_description:

Product codeCodes de produit
Product Codes:

824-8019

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: >200° F

Density (lb/gal): 8.32

Solid (% by weight): 7.5%

Solid (% by volume): 6%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_824-8019_Promatch_Aqua_Wiping_Stain_Base_Low_VOC.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap