C-MIX Intermix System

825-0901 Promatch® C-Mix 550 SB Stain

Product Codes:

825-0901 Natural

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to staining Sealers, if used, should be sanded prior to being coated with 280/320 grit stearated paper. Appropriate sealers are Chemcraft 550 sealers.

General Information:

Agitate material before use. Promatch C-Mix 550 must be agitated thoroughly at all times to ensure product consistency and consistent gloss.

Application by spray. These stains must then be wiped into the grain and wiped clean with a clean rag to ensure good adhesion by subsequent clear coats.

PDF Name: US-PIS_825-09XX_Promatch_C-Mix_550_SB_Stain

Tack Free Time: 1 hour

Files: US-PIS_825-09XX_Promatch_C-Mix_550_SB_Stain.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: 10 – 40 minutes

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

825-09XX 550 VOC Stain stains offer a simple, low VOC one step stain color with good clarity and ease of workability. They may be clear coated with any of the Chemcraft solvent based Chemlack 550, Opticlear 550 or Plastofix Plus 550 products as well as the sealers associated with these systems.

All 825-09XX 550 VOC Stains are acid stable. They will not change color when an acid cured Chemcraft product is used to seal and topcoat them. These stains demonstrate good open time to allow for uniform appearance on large pieces.

spec_uses:

825-09XX 550 VOC Stains are all-purpose wipe stains for furniture, millwork and cabinets.

VOC less exempt lb/gal: <4.60

VOC lb/gal: <3.92

VOC less exempt g/l: <550

VOC g/l: <470

VOC lb/lb Solid: 1.49

VHAPs lb/lb Solid: 0.05

Note:

See individual compliance sheets for specific data

Suggested Uses:

Wood Stain

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: 800-5500 or 803-1387

Recommended Wet Film: N/A

Coverage:

Coverage will vary depending on method of application and required color depth.

Note application:

N/A

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): 7.3 – 8.2

Solid (% by weight): 30% - 44%

Solid (% by volume): 29% - 35%

Shelf Life (months): 24

C-MIX Intermix System

825-0901 Promatch® C-Mix 550 SB Stain

Find distributor

spec_description:

Back

C-MIX Intermix System

825-0901 Promatch® C-Mix 550 SB Stain

spec_description:

Product codeCodes de produit
Product Codes:

825-0901 Natural

Product information

Product specifications

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): 7.3 – 8.2

Solid (% by weight): 30% - 44%

Solid (% by volume): 29% - 35%

Shelf Life (months): 24

Uses

Environmental data (as supplied)

Application data

Surface Preparation

General Information

Drying Times

Find distributor

Download product information sheets

Files: US-PIS_825-09XX_Promatch_C-Mix_550_SB_Stain.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap