GLAZE
825-3641 Promatch® Dry Glaze Neutral
Product Codes:

825-3641

Surface Preparation:

N/A

General Information:

Prior to use, agitate thoroughly and tint as required with 844 line tints to a maximum of 7% by volume. Apply the Promatch Dry Glaze Neutral over a sealer coat. Sand sealer with 280/320 grit paper before use. The Promatch Dry Glaze Neutral needs to be applied and topcoated within 8 hours of sanding the sealer.

Apply by spray and allow the Promatch Dry Glaze Neutral to dry before removing excess material with a solvent-wetted rag or Scotch-Brite pad. To ensure good adhesion of the finished system, remove as much of the Promatch Dry Glaze Neutral as possible from the exposed areas before topcoating.

Promatch Dry Glaze Neutral must be thoroughly agitated to ensure product consistency.

 

PDF Name: US-PIS_825-3641_Promatch_Dry_Glaze_Neutral
Tack Free Time: N/A
Files: US-PIS_825-3641_Promatch_Dry_Glaze_Neutral.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
Dry to Sand: N/A
Dry to Stack: N/A
Note: N/A
spec_description:

Promatch Dry Glaze Neutral is an all-purpose dry glaze for furniture and cabinets. It is specially formulated to be used with 844 line tints and can be tinted up to a maximum of 7% by volume.

spec_uses:

Promatch Dry Glaze Neutral is used to provide a highlighting effect on furniture, cabinets and paneling. When properly applied, it will provide a highlighted effect with excellent adhesion properties.

VOC less exempt lb/gal: <6.5
VOC lb/gal: <6.5
VOC less exempt g/l: <768
VOC g/l: <768
VOC lb/lb Solid: <12.0
VHAPs lb/lb Solid: <0.01
Note:

N/A

Suggested Uses:

Wood Glaze

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: 800-5500
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 54°F (12.2°C)
Density (lb/gal): 6.95
Solid (% by weight): 7.78%
Solid (% by volume): 2.75%
Shelf Life (months): 24

GLAZE

825-3641 Promatch® Dry Glaze Neutral

Find distributor

spec_description:

Promatch Dry Glaze Neutral is an all-purpose dry glaze for furniture and cabinets. It is specially formulated to be used with 844 line tints and can be tinted up to a maximum of 7% by volume.

Read more

GLAZE

825-3641 Promatch® Dry Glaze Neutral

spec_description:

Promatch Dry Glaze Neutral is an all-purpose dry glaze for furniture and cabinets. It is specially formulated to be used with 844 line tints and can be tinted up to a maximum of 7% by volume.

Read more
Product code
Product Codes:

825-3641


Product information

Product specifications

Viscosity:

N/A

Flash Point: 54°F (12.2°C)
Density (lb/gal): 6.95
Solid (% by weight): 7.78%
Solid (% by volume): 2.75%
Shelf Life (months): 24

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us