PROMATCH® C-Mix Tints

825-92XX Promatch® C-Mix Tints Solvent Base Stain

Product Codes:

825-9201 Black

825-9202 Burnt Sienna

825-9203 Burnt Umber

825-9205 Red

825-9206 Raw Sienna

825-9207 Raw Umber

825-9208 Van Dyke

825-9209 White

825-9210 Bright Yellow

825-9211 Bright Red

Surface Preparation:

As per 825-9000 Promatch Stain Base.

General Information:

Promatch 825-90XX can be tinted with Chemcraft 825-92XX tints along with universal tints like the 844 and 866 quality. The maximum recommended amount of tints to add to the stain is:

825-92XX tints 15 % by volume, 844 and 866 universal tints 5 % by volume.

These products may be clear coated with any of the following systems: All pre-catalyzed lacquer, post-catalyzed lacquer, varnish and ora Verde from Chemcraft as well as the sealers associated with these systems.

All 825-90XX colors are acid stable. They will not change color when an acid cured Chemcraft product is used to seal and topcoat them.

These stains demonstrate good open time to allow for uniform appearance on large pieces.

Product must be thoroughly agitated before use.

PDF Name: US-PIS_825-92XX_Promatch_C-Mix_Tints_Solvent_Base_Stain

Tack Free Time: N/A

Files: US-PIS_825-92XX_Promatch_C-Mix_Tints_Solvent_Base_Stain.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

Promatch C-Mix Tints 825-92XX are tint concentrates of the 825-90XX line. They should be mixed well due to the heavy concentration of pigments. The tints are intermixable with each other and with the 825-90XX bases. Promatch C-Mix Tints offer a simple solution for custom tinting of strong colors in the Promatch Stain Base.

spec_uses:

As a tinter in stains for interior wood applications.

VOC less exempt lb/gal: 4.4 – 5.9

VOC lb/gal: 4.4 – 5.9

VOC less exempt g/l: 530 – 705

VOC g/l: 530 – 705

VOC lb/lb Solid: 0.37 – 1.7

VHAPs lb/lb Solid: 0.02 – 0.42

Note:

N/A

Suggested Uses:

Wood Stain

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: 800-4310 (5 to 15 % by volume)

Clean-up Solvent: Lacquer Thinner

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 115°F

Density (lb/gal): 9.3– 16.1

Solid (% by weight): 37 - 68%

Solid (% by volume): 20 - 40%

Shelf Life (months): 12

PROMATCH® C-Mix Tints

825-92XX Promatch® C-Mix Tints Solvent Base Stain

Find distributor

spec_description:

Back

PROMATCH® C-Mix Tints

825-92XX Promatch® C-Mix Tints Solvent Base Stain

spec_description:

Product code
Product Codes:

825-9201 Black

825-9202 Burnt Sienna

825-9203 Burnt Umber

825-9205 Red

825-9206 Raw Sienna

825-9207 Raw Umber

825-9208 Van Dyke

825-9209 White

825-9210 Bright Yellow

825-9211 Bright Red

Product information

Product specifications

Viscosity:

N/A

Flash Point: 115°F

Density (lb/gal): 9.3– 16.1

Solid (% by weight): 37 - 68%

Solid (% by volume): 20 - 40%

Shelf Life (months): 12

Uses

Environmental data (as supplied)

Application data

Surface Preparation

General Information

Drying Times

Find distributor

Download product information sheets

Files: US-PIS_825-92XX_Promatch_C-Mix_Tints_Solvent_Base_Stain.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap