VIVID DYE CONCENTRATE

890-77XX Promatch® Vivid Dye Concentrate

Product Codes:

890-7707 Yellow
890-7708 Red
890-7709 Orange
890-7710 Black
890-7711 Green
890-7712 Red BL

Surface Preparation:

Wood substrate should be sanded with 120, 150 or 180 grit paper prior to staining or coating. Wood must be well sanded and without large imperfections.

General Information:

Products can be used to tint various stains or stain bases and can also be reduced any amount with 800-5500 Acetone.

Toner penetrates deeply and cannot be “worked in: like wiping stains in order to achieve uniformity. Birch is especially suitable for Toner.

PDF Name: US-PIS_890-77XX_Promatch_Vivid_Dye_Concentrate

Tack Free Time: N/A

Files: US-PIS_890-77XX_Promatch_Vivid_Dye_Concentrate.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

The Promatch Vivid Dye Concentrate line consists of dyes dissolved in a non-grain raising solvent blend.

spec_uses:

Due to their strength, the Promatch Vivid Dye concentrates can be used to tint various stains or stain bases as well as a first coat on wood to give bright, clear, transparent effects. It is adequate for interior exposure on expensive furniture, but is not designed for exterior exposure.

VOC less exempt: < 5.2

VOC lb/gal: <1.5

VOC less exempt g/l: < 625

VOC g/l: < 180

VOC lb/lb Solid: < 1.9

VHAPs lb/lb Solid: <0.01

Note:

N/A

Suggested Uses:

Wood Finish

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: 800-5500 Acetone

Retarder: N/A

Clean-up Solvent: 800-5500 Acetone

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): 6.91 – 7.22

Solid (% by weight): 9.93 – 17.36%

Solid (% by volume): 5.88 – 9.84%

Shelf Life (months): 12

VIVID DYE CONCENTRATE

890-77XX Promatch® Vivid Dye Concentrate

Find distributor Trouver un distributeur

spec_description:

The Promatch Vivid Dye Concentrate line consists of dyes dissolved in a non-grain raising solvent blend.

BACK

VIVID DYE CONCENTRATE

890-77XX Promatch® Vivid Dye Concentrate

spec_description:

The Promatch Vivid Dye Concentrate line consists of dyes dissolved in a non-grain raising solvent blend.

Product codeCodes de produit
Product Codes:

890-7707 Yellow
890-7708 Red
890-7709 Orange
890-7710 Black
890-7711 Green
890-7712 Red BL

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): 6.91 – 7.22

Solid (% by weight): 9.93 – 17.36%

Solid (% by volume): 5.88 – 9.84%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_890-77XX_Promatch_Vivid_Dye_Concentrate.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap