PROMATCH® Dye Concentrates

890-82XX Promatch® Dye Concentrates (O VOC)

Product Codes:

890-8239 Black

890-8240 Warm Brown

890-8241 Van Dyke

890-8242 Red

890-8243 Yellow

Surface Preparation:

Wood substrate should be sanded with 120, 150 or 180 grit paper prior to staining or coating. Wood must be well sanded and without large imperfections.

General Information:

Products can be used to tint various stains or stain bases and can also be reduced any amount with 800-5500 Acetone.

Depending on the stain base that they are being used in these Dye Concentrates may have varying levels of use. Please refer to any accompanying product information sheets for the base material.

Dye penetrates deeply and cannot be “worked in” like wiping stains in order to achieve uniformity. Substrate preparation is critical when applying dye stains direct to wood.

PDF Name: US-PIS_890-82XX_Promatch_Dye_Concentrates_(O_VOC)

Tack Free Time: N/A

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

The 890-82XX line of Dye Concentrates line consists of dyes dissolved in acetone for zero VOC and compliant applications.

spec_uses:

Due to their strength, these Dye concentrates can be used to tint various stains or stain bases as well as a first coat on wood to give bright, clear, transparent effects. It is adequate for interior exposure on expensive furniture, but is not designed for exterior or direct sunlight exposure.

VOC less exempt: 0

VOC lb/gal: 0

VOC less exempt g/l: 0

VOC g/l: 0

VOC lb/lb Solid: 0

VHAPs lb/lb Solid: 0

Note:

N/A

Suggested Uses:

Wood Stains

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: 800-5500 Acetone

Retarder: N/A

Clean-up Solvent: 800-5500 Acetone

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): 6.67

Solid (% by weight): 3.1%

Solid (% by volume): 1.8%

Shelf Life (months): 12

PROMATCH® Dye Concentrates

890-82XX Promatch® Dye Concentrates (O VOC)

Find distributor Trouver un distributeur

spec_description:

The 890-82XX line of Dye Concentrates line consists of dyes dissolved in acetone for zero VOC and compliant applications.

BACK

PROMATCH® Dye Concentrates

890-82XX Promatch® Dye Concentrates (O VOC)

spec_description:

The 890-82XX line of Dye Concentrates line consists of dyes dissolved in acetone for zero VOC and compliant applications.

Product codeCodes de produit
Product Codes:

890-8239 Black

890-8240 Warm Brown

890-8241 Van Dyke

890-8242 Red

890-8243 Yellow

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): 6.67

Solid (% by weight): 3.1%

Solid (% by volume): 1.8%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap