VERDE BIANCO Basecoat

536-1255 ora Verde® Bianco PU Basecoat Neutral

Product Codes:

536-1255

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Basecoat should be sanded with 280/320 grit paper prior to being coated. The Basecoat should be coated within eight hours of being sanded. Appropriate topcoat is the ora Verde Bianco 109-48XX, or ora Verde Chiaro 436-48XX. When recoating, the previous coat must be sanded and the next coat applied within eight hours.

General Information:

The mixed product contains 876-9068, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detailed information.

Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener.

The relative humidity in the application and drying room must not exceed 75% for maximum coating performance. The hardener must not be exposed to water or solvents containing alcohol.

PDF Name: US-PIS_536-1255_ora_Verde_Bianco_PU_Basecoat_Neutral

Tack Free Time: 20 minutes

Files: US-PIS_536-1255_ora_Verde_Bianco_PU_Basecoat_Neutral.pdf

Dry to Sand : 2 hours

Dry to Stack: 24 hours

Tack Free Time: 10 minutes @ room temperature

Dry to Sand: 15 minutes @ 110°F

Dry to Stack: 15 minutes @ 140°F

Note: N/A

spec_description:

Bianco is our pigmented polyurethane system; Bianco PU Basecoat Neutral is a universal primer designed to be used in conjunction with our ora Verde® line topcoats. Durable and flexible, it can be used as tinted primer to achieve deep, dark and rich colors. Builds quickly to help you achieve a high end look when your need is for an opaque color.

spec_uses:

Developed for use in the high end kitchen cabinet market. Its durability will also allow for use in store fixture applications.

VOC less exempt: <4.4

VOC lb/gal: <4.4

VOC less exempt g/l: <530

VOC g/l: <530

VOC lb/lb Solid: <0.72

VHAPs lb/lb Solid: <0.17

Note:

N/A

Suggested Uses:

Wood Finish

Mixing Ratio:

100 Parts 536-1255 with 50 Parts 876-9068 (by volume)

Pot Life:

2 Hours

Application Viscosity:

Zahn #2 signature cup 30 seconds

Reducer: Fast 803-1410, Medium 803-1409, or slow 803-1408 if needed

Retarder: 800-5328 3-5% by volume

Clean-up Solvent: 800-5500 Acetone

Recommended Wet Film: 3 to 5 wet mils

Coverage:

N/A

Note application:

MAXIMUN DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 6.0 DRY MILS

Viscosity:

Zahn #3 signature cup 45 sec at 77°F

Flash Point: 21°F

Density (lb/gal): 10.5

Solid (% by weight): 58%

Solid (% by volume): 39%

Shelf Life (months): 12

VERDE BIANCO Basecoat

536-1255 ora Verde® Bianco PU Basecoat Neutral

Find distributor Trouver un distributeur

spec_description:

BACK

VERDE BIANCO Basecoat

536-1255 ora Verde® Bianco PU Basecoat Neutral

spec_description:

Product codeCodes de produit
Product Codes:

536-1255

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #3 signature cup 45 sec at 77°F

Flash Point: 21°F

Density (lb/gal): 10.5

Solid (% by weight): 58%

Solid (% by volume): 39%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_536-1255_ora_Verde_Bianco_PU_Basecoat_Neutral.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap