D-DUR White Pigmented Primer

621-001 D-Dur White PU Pigmented Primer

Product Codes:

621 - 001 D-Dur Primer

Surface Preparation:

Wood substrate should be sanded with 120, 150 or 180 grit prior to staining or coating.

General Information:

Mix the desired amount of material and apply 3-5 mils wet.

The relative humidity in the application and drying rooms should never exceed 75%. Viscosity on the mixed material should be monitored regularly to maintain a consistent appearance.

Mixed product will contain 999-062, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of these materials.

Total recommended film thickness of D-Dur system is not to exceed 6 mils dry.

PDF Name: US-PIS_621-001_D-Dur_White_PU_Pigmented_Primer

Tack Free Time: 10 - 15 minutes

Files: US-PIS_621-001_D-Dur_White_PU_Pigmented_Primer.pdf

Dry to Sand : 4 hours

Dry to Stack: Overnight (Complete curing is obtained after 7 days air dry)

Tack Free Time: 10 minutes

Dry to Sand: 2 hours

Dry to Stack: Overnight (Complete curing is obtained after 7 days air dry)

Note: N/A

spec_description:

D-Dur Primer is a rapid drying, thixotropic, two-component Polyurethane primer with good sanding capabilities. It also has good durability, good resistance to chemicals and good weathering properties.

spec_uses:

This finish is recommended for wooden surfaces where good outdoor durability is desired (i.e., window frames, doors, wooden garden furniture). If using this product outdoors, be sure to use an exterior grade topcoat like the D-Dur line.

VOC less exempt: 4.75

VOC lb/gal: 3.79

VOC less exempt g/l: 569

VOC g/l: 454

VOC lb/lb Solid: 0.76

VHAPs lb/lb Solid: 0.33

Note:

N/A

Suggested Uses:

Wood Finish

Mixing Ratio:

4:1 with 999-062(100 parts 621-001 to 25 parts 999-062)

Pot Life:

3 hours

Application Viscosity:

Zahn #2 signature 20 - 30 seconds

Reducer: 800-5301

Retarder: 800-5328

Clean-up Solvent: Lacquer Thinner (do not mix with product)

Recommended Wet Film: 3 - 5 wet mils

Coverage:

N/A

Note application:

N/A

Viscosity:

6500 cps at 77°F

Flash Point: -18°C

Density (lb/gal): 10.1

Solid (% by weight): 54%

Solid (% by volume): 35%

Shelf Life (months): 12

D-DUR White Pigmented Primer

621-001 D-Dur White PU Pigmented Primer

Find distributor Trouver un distributeur

spec_description:

BACK

D-DUR White Pigmented Primer

621-001 D-Dur White PU Pigmented Primer

spec_description:

Product codeCodes de produit
Product Codes:

621 - 001 D-Dur Primer

Product information

Product specificationsSpécifications du produit

Viscosity:

6500 cps at 77°F

Flash Point: -18°C

Density (lb/gal): 10.1

Solid (% by weight): 54%

Solid (% by volume): 35%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_621-001_D-Dur_White_PU_Pigmented_Primer.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap