431-1701 Variseal® 275 Pre-Cat Clear Sealer

Variseal 275 is the recommended sealer for the Varicure 275 system and is intended for use on office and household furniture, kitchen cabinets, as well as many other interior wood applications. 

Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to staining or coating. Stain systems used under acid catalyzed systems should be acid stable.  AkzoNobel recommends using 825-39XX series stains.

Agitate material before use. Always mix Variseal 275 while adding hardener and reducers in the recommended mixing ratios. Variseal 275 must be agitated thoroughly at all times to ensure product consistency.

Apply one or two coats at 3 – 5 mill wet. The second coat must be applied the same day as the previous coat is sanded.

Appropriate topcoat is Varicure 275 431-17XX.

Variseal 275 may be catalyzed to further enhance its durability. Contact your coating supplier for a recommendation.

Variseal 275 must not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats and before topcoating. Variseal 275 must not be used and dried at temperatures below 64°F or relative humidity above 65%. During hardening the coating must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration.

The maximum film build of Variseal 275 should not exceed 2 mils dry. Maximum film build of total coating system must not exceed 4 mils dry. This product does contain formaldehyde, but the quantity is below the reportable amount according to OSHA regulation 1910.1048.