Retarder

800-5328 Retarder

Product Codes:

800-5328

Surface Preparation:

N/A

General Information:

Follow recommendations found on Product Information Sheets of materials using this product.

Refer to the Material Safety Data Sheet for important information on safety and handling for this material.

Vapor and liquid are irritating to skin and eyes. Wear goggles and gloves where there is danger of contact with the liquid.

The area must be mechanically ventilated when this product is used in large quantities.

PDF Name: US-PIS_800-5328_Retarder

Tack Free Time: N/A

Files: US-PIS_800-5328_Retarder.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

Retarder 800-5328 is a general-purpose retarder for use in most products including nitrocellulose, vinyl and Reactive Amino Coatings (RAC).

spec_uses:

Retarder will slow the curing process allowing moisture to evaporate from the coating. This is desirable in hot weather.

VOC less exempt: <7.91

VOC lb/gal: <7.91

VOC less exempt g/l: <948

VOC g/l: <948

VOC lb/lb Solid: N/A

VHAPs lb/lb Solid: N/A

Note:

N/A

Suggested Uses:

Retarder

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: N/A

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

EVAPORATION RATE: 0.12 (N-Butyl acetate=1)

Viscosity:

N/A

Flash Point: 136°F (58°C)

Density (lb/gal): 7.91

Solid (% by weight): N/A

Solid (% by volume): N/A

Shelf Life (months): N/A

Retarder

800-5328 Retarder

Find distributor Trouver un distributeur

spec_description:

Retarder 800-5328 is a general-purpose retarder for use in most products including nitrocellulose, vinyl and Reactive Amino Coatings (RAC).

BACK

Retarder

800-5328 Retarder

spec_description:

Retarder 800-5328 is a general-purpose retarder for use in most products including nitrocellulose, vinyl and Reactive Amino Coatings (RAC).

Product codeCodes de produit
Product Codes:

800-5328

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: 136°F (58°C)

Density (lb/gal): 7.91

Solid (% by weight): N/A

Solid (% by volume): N/A

Shelf Life (months): N/A

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_800-5328_Retarder.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap